Introduction of Vertical corn seeds dryers
Vertical corn cob dryer, also known as tower-type corn ear dryer, is a kind of large scale professional mechanized continuous drying equipment for corn seed and corn cob; it sort and clean the harvested fresh corn clusters without being threshed, and then put them directly into the dryer to conduct the drying operation, which effectively reduces the rate of broken corn seeds during drying and ensures the quality of the seeds. Compared with the traditional horizontal type single chamber corn cluster dryer, tower type corn cluster dryer has many obvious advantages,such as rapid dehydration, drying uniformity,high degree of automation,small footprint, low comprehensive investment cost,etc.
The system of the dryer is composed of multiple sets of vertical drying towers that are functionally independent of each other.Corn cluster to be dried will be put in from the feeding inlet above the drying tower and move continuously downwards; the hot air will horizontally pass through the corn clusters moving vertically to dry them; well dried corn clusters are continuously discharged through the discharging mechanism; the discharging mechanism is driven by VVVF motor and its discharging capacity can be steplessly adjusted and controlled to adapt to different capacity requirements. A number of air temperature and humidity monitoring sensors are set up in the hot air intake duct of each set of drying tower and the hot air duct and exhaust air duct of drying tower to automatically detect the multi-point temperature and humidity of hot air and exhaust gas in all drying towers in a real-time way; the monitored data can be stored or printed and are displayed on computer; the can be remotely transmitted.
Corn ear dryer is composed of feeding system, cleaning system,conveying system, cluster feeding machine, multiple cluster drying towers that are independent of each other, heating system, electric control system, etc. Corn seed cluster drying system can bedesigned as one-time drying process or two-time drying process.
This dryer and the supporting cluster feeding machine have be granted with national patent.
■ Small footprint; under the premise of the same processing amount, it’s1/2 of the horizontal (bed type) com cluster dryer’s.
■ The wet cluster loading capacity of each cluster drying tower is up to 400m³and the number of drying towers can be configured as needed．
■ The drying tower is divided into preheating section and drying section;after entering the drying tower, the clusters are firstly preheatedby the exhaust air discharged from the drying section and then be dried, which can effectively improve the utilization rate of the heat energy.
■ It adopts the method of paralleling multiple sets of drying towers, and the drying towers are in dependent of each other and can be used partially or completely.
■ It is easy to operate with computer electrical centralized control.
■ The continuous drying method of the drying system can be transformed into intermittent drying method in order to meet different drying needs．
Introduction of Horizontal corn seed dryers
Horizontal corn seed (cluster) dryer is a kind of dedicated drying equipment for corn seeds and clusters;it sort and clean the harvested fresh corn clusters without threshing, and then put them directly into the dryer to conduct the drying operation, which effectively reduces the rate of broken corn seeds during drying and ensures the quality of the seeds．
This dryer is a fixed chamber type drying equipment composed of feeding system,cleaning system, conveying system, cluster-drying chamber, heating system, electrical control systems, etc.The main body of the dryer is composed of multiple monomer drying chambers permutated and combined in a plane; each monomer drying chamber is independent of each other, and each of them can hold 25~50 tons of corn cluster ,in the drying process, hot air is supplied respectively to each monomer drying chamber through a large hot air duct. after the moisture content of the corn clusters drops to a predetermined value, discharge the dried corn cluster from the drying chamber, then feed again to begin the next drying cycle．
Corn seed cluster drying system can be designed as one-time drying process or two-time drying process. One-time drying process is to dry the wet clusters below the safe moisture at one time, and then store it in the warehouse after threshing and cleaning．Two-time drying process is to dry the wet cluster to about l 8% of moisture content, and then dry the threshed seeds below the safe moisture and store it in the warehouse after cleaning. The two drying processes have their own characteristics, so a proper one can be chosen according to the initial moisture content ofcorn seeds and the user's requirements．
■Dry the cluster directly and reduce the rate of broken seeds to the maximum extent
■The overall drying process can be designed and configured flexibly according to the initial moisture content of corn seeds and the user’s requirements．
■It adopts the low temperature drying technology and can ensure the quality requirements of seeds．
■The wet cluster loading capacity of each cluster drying chamber has several specifications, such as 25t,50t, etc.;the number of drying chambers can be configured as needed; the one batch wet cluster loading capacity of the complete machine is 500～l500t．